bedrijfsnieuws over How to prevent fogging on doors and Windows in winter？

Winter window fog, frost, and indoor humidity can cause the sill to harbor bacteria and fungi for a long time, affecting the health of the home. So, how can we prevent fog and frost from forming on the home's door and window?

First of all, we should understand the reason. In winter, when the outdoor temperature is very low and the indoor temperature and humidity are high, the surface of the glass, window sash, and window frame will produce small water droplets, which is a condensation phenomenon. When condensation fails to evaporate quickly, water droplets form and flow along the edge of the glass.

So, how to prevent home doors and Windows from fogging or frosting? This should start from the source of the selection of doors and Windows to pay attention to, so doors and Windows products from the purchase, we should pay attention to the following details.

Part1. Choose double or triple-insulating glass

Double-layer or above insulating glass has strong thermal insulation performance. In cold winter, even if the outdoor temperature drops to -30℃, the indoor glass surface temperature is close to the room temperature, far higher than the condensation temperature.

Sanjing doors and Windows all products choose double or triple-layer hollow tempered glass with 3C certification, and the application of an advanced integrated bending process, to ensure the sealing effect of glass, heat preservation, and moisture effectively reduce the temperature difference between indoor and outdoor, prolong the service life of glass.

Part2. Select the multi-channel sealing process

The ability of sealing strips to prevent air penetration of doors and Windows when they are normally closed. The better the airtight performance, the less heat exchange, the less impact on the room.

SZG Windows and doors adopt a full foaming integrated bending isobaric rubber strip, a multiple sealing system, so that the sealing effect between the system assembly gap can be better. Enhance air tightness and highlight the perfect details of the product.

Part3. Select the pin cementing corner code process

System doors and Windows are a perfect performance of the organic combination; each other determines the safety of the house, comfort. The corner position of the door and window group adopts a pin gluing process, the corner code and connecting parts are designed with special gluing and bonding connecting channel, to ensure the strength of the whole window connection, eliminate leakage, and ensure water tightness.

Part4. Keep proper ventilation

In addition, proper ventilation can also reduce the large indoor temperature difference. If you can choose the way of opening inside and pouring inside and opening outside, you can flexibly ventilate, and you will not catch a cold because the wind is blowing directly on us.

Doors and Windows are different from other products. They can be used for a longer period, and high-quality doors and Windows can better withstand the influence of the outside climate on people’s lives. Choose the right window, make a better and warmer winter.